What a signet ring is
A signet ring is recognised by its broad, flat band that ends in a plate on the top. That plate is the very heart of the ring. Originally it was used as a personal seal, where a monogram or a symbol was pressed into warm wax to seal letters and documents. The face was then cut with the motif in mirror image, so that the impression in the wax faced the right way. That is why the signet ring has always been tied to identity and to a particular person rather than being a purely decorative piece of jewellery.
Today the seal is rarely used in practice, but the shape is the same. The flat plate can be completely smooth, carry an engraved detail or be set with a stone. At Longvé the signet ring comes in sterling silver in both an oval signet ring sterling silver and a square signet ring sterling silver, where the shape of the plate determines how round or bold the ring appears on the hand. See the full range of signet rings to compare the shapes side by side.
Oval, square or rectangular plate
The shape of the plate is what sets the individual signet rings apart the most. The oval plate has soft edges and follows the line of the finger, so the ring appears rounded and discreet. The square plate stands out more boldly and gives a clearer face to look at from the front. The rectangular plate is longer than it is wide and pulls the expression in a tighter, more graphic direction.
Two of Longvé's signet rings have a set stone of black agate, which is a dark, opaque stone. This applies to the square signet ring black agate sterling silver with the square plate and the rectangular signet ring black agate sterling silver with the elongated one. The black stone covers the entire plate and gives a calm, dark field instead of the shiny silver surface. If you want the metal itself as the surface, the smooth silver plate without a stone is the pure choice.
Engraving of initials or monogram
The flat plate is made to carry a motif, and this is where the signet ring takes on its personal character. Classically, a single initial, two interlaced letters in a monogram or a small symbol such as a coat of arms is engraved. Because the face is broad and flat, there is room for more than on an ordinary band, and the motif sits clearly in the middle of the hand.
On the models with a smooth silver plate, the metal stands bare and ready for a motif. On the models with black agate, the plate is already covered by the stone, so here it is the face of the stone itself that carries the expression instead of an engraving.
Which finger the signet ring sits on
Traditionally the signet ring is worn on the little finger, most often on the non-dominant hand. That placement stems from the time when the ring was used as a seal, and where the little finger made it easy to press the plate down into wax without the ring being in the way. Many still stick to that placement today.
There is, however, no fixed rule. The signet ring is also worn on the index or middle finger, and the choice depends just as much on which finger the ring fits and how the plate falls on the hand. A broader plate takes up more space and stands out most clearly on one of the longer fingers. If you want to delve into what the placement means, you can read on in what a signet ring is and what a ring on the thumb means.
Sizes and fit on sterling silver
Longvé's signet rings in sterling silver each come in a single size. The oval signet ring comes in size 52, the square silver ring in size 58, the model with square black agate in size 60 and the rectangular one with black agate in size 52. The ring size corresponds to the inner diameter of the finger, where size 52 is 16.6 millimetres and size 58 is 18.5 millimetres.
Because the signet ring has a broad, flat band, it sits differently from a thin ring. The broad band covers more of the finger and can feel a little tighter at the knuckle, so it needs to be able to pass the knuckle without digging in. If you are in doubt about how a ring should sit, how tight should a ring sit gives a concrete answer.
Sterling silver in the signet ring
All of Longvé's signet rings are made of sterling silver. Sterling silver is an alloy of 92.5 percent pure silver and 7.5 percent other metals, usually copper, which is added to make the soft silver hard enough for daily use. That is precisely why many silver pieces of jewellery carry the 925 hallmark, which indicates the silver content. The background is explained in what 925 in a ring means.
Silver can darken over time when it reacts with sulphur in the air. It is a surface film that can be polished off again, so the ring regains its shine. The broad plate on the signet ring is easy to reach, and a soft cloth goes a long way. If you want the full procedure, how to clean jewellery describes it step by step.




